HP StoreOnce B6200 Maintenance and Service Guide (February, 2014)

OR
• Using the P2000 GUI Storage Management Utility (SMU)
1. From a browser window, connect to the P2000 SMU using the IP address shown
above.
2. Under the Provisioning tab click on Delete Volumes.
7. Connect a monitor and keyboard directly to the VGA output and USB port of the bottom node
of the rack.
8. Power up the node (server) at the bottom of the StoreOnce rack.
a. If there are two racks, power up the node in rack 1. (Rack 1 has the switch with 1GbE
ports.)
b. The node will boot from the QR USB stick and the following screen will appear:
Quick restore the cluster 59