HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2007)

TIP:
If more than one HP D2D Backup System is being configured at the same time, it may be useful
to physically identify a D2 D device. Use Beacon mode to flash the LEDs on the selected device.
• iSCSI installation and configuration: If required, this step retrieves and installs the Microsoft
iSCSI initiator, connects this host to the HP D2D Backup System and configures an autoloader,
as defined by the user. The second option presented in this dialog is appropriate for most
backup applications and is the recommended option. You may edit the number of slots, if
required.
42
The Installation wizard