HP D2220sb Storage Blade Maintenance and Service Guide

Removal and replacement procedures 29

Remove the drive.

To replace the component, reverse the removal procedure.

FBWC capacitor pack

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent damage to electrical components, properly ground the server blade

before beginning any installation procedure. Improper grounding can cause ESD.

CAUTION: Do not operate the D2220sb with the access panel open or removed. Operating the

D2220sb in this manner results in improper airflow and improper cooling that can lead to thermal

damage.

To remove the component:

1. Back up all data on the D2220sb.

2. Power down the partner server blade (on page 21).

3. Remove the D2220sb (on page 21).

4. Remove the access panel (on page 26).