HP D2220sb Storage Blade installation instructions

3. Install the drives.
4. Close the drive drawer.
5. Remove the enclosure connector cover.
6. Do one of the following:
o To install the D2220sb with a half-height server blade,
proceed with the next step.
CAUTION: Failure to install the divider in a quadrant
when installing half-height blades can result in damage to
the connectors on the server blades.
o To install the D2220sb with a full-height server blade, install
the half-height blade shelf.
If installing two D2220sb storage blades with one full-height
partner server blade, install the second D2220sb in the bay
directly above the first one. The second D2220sb does not
require a half-height blade shelf.
If installing two D2220sb storage blades with one partner
server blade in an HP BladeSystem c3000 enclosure, use the
mini divider instead of the half-height blade shelf. For more
information, see the HP BladeSystem c3000 Enclosure Quick
Setup Instructions.
7. Prepare the storage blade for installation.
8. Install the storage blade:
o Partnered with a half-height server blade
o Partnered with a full-height server blade
o Partnered with a full-height server blade and an additional
D2220sb
9. Install a server blade. See the documentation that ships with the
server blade.
10. Configure the D2220sb.
For configuration information, safety information, and regulatory
notices, see the HP D2220sb Storage Blade User Guide.