HP StorageWorks D2200sb PCIe Storage Blade Maintenance and Service Guide

Removal and replacement procedures 42
to thermal damage.
To remove the component:
1. Back up all data on the storage blade.
2. Power down the partner server blade (on page 22).
3. Remove the storage blade (on page 22).
4. Remove all drives ("Remove the drives" on page 24).
5. Remove the access panel (on page 26).
6. Remove the drive drawer ("Drive drawer" on page 37).
7. Remove the bottom drive drawer slide assembly from the chassis.
You do not need to remove the remaining slide assembly from the chassis or either slide assembly from
the drive drawer.