HP StorageWorks D2200sb PCIe Storage Blade Maintenance and Service Guide

Removal and replacement procedures 32
CAUTION: To prevent damage to electrical components, properly ground the storage blade
before beginning any installation procedure. Improper grounding can cause ESD.
To remove the component:
1. Power down the partner server blade (on page 22).
2. Remove the storage blade (on page 22).
3. Remove the front panel.
To replace the component, reverse the removal procedure.
LED panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the storage blade
before beginning any installation procedure. Improper grounding can cause ESD.
To remove the component:
1. Power down the partner server blade (on page 22).
2. Remove the storage blade (on page 22).
3. Remove the front panel ("Front panel" on page 31).