HP StorageWorks D2200sb PCIe Storage Blade Maintenance and Service Guide

Removal and replacement procedures 31
5.
Open the drive drawer. Extend the drawer to gain access to the FBWC module.
6. Remove the cache module from the system board.
The drive drawer and cable spool are not shown for clarity.
IMPORTANT: To avoid possible damage to the storage blade, be sure that the FBWC module is
fully seated before installing the retaining screw.
To replace the component, reverse the removal procedure.
Front panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.