HP StorageWorks D2200sb PCIe Storage Blade Installation Instructions

3. Install the hard drives.
4. Close the hard drive drawer.
5. Remove the enclosure connector cover.
6. Identify the partner server blade to be installed with the
D2200sb:
o To install the D2200sb with a half-height server blade,
proceed with the next step.
o To install the D2200sb with a full-height server blade,
install the half-height blade shelf.
If installing two D2200sb storage blades with one partner
server blade, install the second D2200sb in the bay directly
above the first one.
If installing two D2200sb storage blades with one partner
server blade in an HP BladeSystem c3000 enclosure, use the
mini divider instead of the half-height blade shelf. For more
information, see the HP BladeSystem c3000 Enclosure Quick
Setup Instructions.
7. Prepare the storage blade for installation.
8. Install the storage blade:
o Partnered with a half-height server blade
o Partnered with a full-height server blade
o Partnered with a full-height server blade and an additional
D2200sb
IMPORTANT: Most full-height server blades connect to
one or two D2200sb storage blades through a PCI
Express Mezzanine card installed in the server. For
server-specific information, see the D2200sb
QuickSpecs.
9. Install a server blade. See the documentation that ships with
the server blade.
10. Configure the D2200sb.
For configuration information, safety information, and regulatory
notices, see the HP StorageWorks D2200sb Storage Blade User
Guide.