HP StorageWorks Continuous Access EVA Administrator Guide (T3687-96043, December 2005)

Table 6 Manual configuration form
Array name:
Array WWN:
Console LUN ID:
(default = 0)
Disk group information
Disk group nam
e:
(default = default disk group)
Device count:
Spare policy: (none, single, or double)
Disk type: (online or nea
rline)
Occupancy alarm:
(default = 95%)
Host information
Folder name:
(default = \Ho
sts\)
Host name:
Operating system:
For each HBA port:
WWN:
Virtual disk information
Folder name:
(default = \Virtual Disks\)
Virtual disk
name:
Disk group:
Size:
Redundancy level: (Vraid0, Vraid1, Vraid5)
Write cache policy: (Mirrored write–back, unmirrored write–back)
Read cache policy:
(On, off)
Read/write
permissions:
(Read/writ
e, read–only)
OS unit ID:
(default = 0)
Preferred path: (None, Path A FO, Path A FO/FB, Path B FO, Path
BFO/FB)
Host name:Presentation:
LUN:
DR group information
Array name:
Source:
Virtual disk members:
Array name:
Destination:
Virtual disk members:
Failsafe mode: (disabled, enabled)
Write mode: (synchronous, asynchronous)
Parameters:
Destination mode: (none, read-only)
HP StorageWorks Continuous Access EVA administrator guide
57