Reference Guide ProtectTools Security Manager

BIOS Configuration for ProtectTools
Reference Guide 5–3
Enabling and disabling system
configuration options
✎
Some of the items listed below may not be supported by your
computer.
To enable or disable system configuration options:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select BIOS Configuration.
3. Enter your Computer Setup setup password at the BIOS
administrator password prompt, and then click OK.
4. In the left pane, select System Configuration, and then
enable or disable a system configuration option, or configure
a system configuration option in the right pane:
❏ Port Options
◆ Serial Port
◆ Infrared Port
◆ Parallel Port
◆ SD Slot
◆ USB Port
◆ 1394 Port
◆ Cardbus Slot
◆ ExpressCard slot
❏ Boot Options
◆ f9, f10, and f12 Delay (Sec)
◆ MultiBoot
◆ Express Boot Popup Delay (Sec)
◆ CD-ROM Boot
◆ Floppy Boot