Reference Guide ProtectTools Security Manager

Embedded Security for ProtectTools
Reference Guide 4–11
Permanently disabling Embedded Security
To permanently disable Embedded Security:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select Embedded Security, and then select
Advanced.
3. In the right pane, under Embedded Security, click Disable.
4. Enter your owner password at the prompt, and then click OK.
Enabling Embedded Security after permanent
disable
To enable Embedded Security after permanently disabling it:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select Embedded Security, and then select
Advanced.
3. In the right pane, under Embedded Security, click Enable.
4. Enter your owner password at the prompt, and then click OK.
Migrating keys with the Migration Wizard
Migration is an advanced administrator task that allows the
management, restoration, and transfer of keys and certificates.
For details on migration, refer to the Embedded Security
online Help.