Reference Guide ProtectTools Security Manager

3–8 Reference Guide
Java Card Security for ProtectTools
b. If applicable, enter your DriveLock user password in
the DriveLock password box, and then enter it again
in the Confirm password box.
c. Enter the Java Card PIN.
d. Click OK.
7. When you are prompted to create a recovery file, refer to
“Creating a recovery file,” or you can click Cancel and create
a recovery file at a later time.
Creating a user Java Card
✎
Power-on authentication and an administrator card must be set
up in order to create a user Java Card.
To create a user Java Card:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select Java Card Security, and then select
Advanced.
3. When the Setup Password dialog box displays, enter your
Computer Setup setup password, and then click OK.
4. Insert a Java Card that will be used as a user card.
5. In the right pane, under Power-on authentication, click
Create next to User card identity.
6. Enter a PIN for the user Java Card, and then click OK.