MultiBoot

4–2 MultiBoot
MultiBoot preferences
Setting a new default boot order in
Computer Setup
To set a boot device order that the computer uses each time it is
turned on or restarted:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner
of
the screen.
2. Use the arrow keys to select System Configuration > Boot
Options, and then press
enter.
3. Use the arrow keys to select Enable in the MultiBoot field.
4. Use the arrow keys to select the boot order that you prefer in
the Boot Order fields.
5. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
Dynamically choosing a boot device
using the f9 prompt
To dynamically choose a boot device for the current start up
sequence:
1. Open the Select Boot Device menu by turning on or restarting
the computer, and then pressing
f9 while the “F9 = Boot
device menu” message is displayed in the lower-left corner
of
the screen.
2. Use the arrow keys to select a boot device, and then press
enter.
Your preferences go into effect immediately.