Modem and Local Area Networks

Modem
Modem and Local Area Networks 7
5. Click Edit.
6. Click either Tone or Pulse.
7. Select OK > OK.
■ Check the telephone number you are dialing and the
response of the remote modem.
Dial a telephone number, make sure there is a response from
the remote modem, and then hang up.
■ Set the modem to ignore dial tones.
If the modem receives a dial tone it does not recognize, it
does not dial and displays a “No Dial Tone” error message.
To set the modem to ignore all dial tones before dialing:
1. Select Start > Control Panel > Network and Internet
Connections.
2. On the upper menu in the left panel of the Network
and
Internet Connections window, click Phone and
Modem Options.
3. Click the Modems tab.
4. Click the listing for your modem.
5. Click Properties.
6. Click Modem.
7. Clear the check box for Wait for dial tone before
dialing.
8. Select OK > OK.