Administrator's Guide: Linux-based HP Compaq t5725 Thin Clients

Drive Mapping
Use this tab to assign drive numbers to drives and configure whether the drive is enabled, readable, and
writeable.
To configure a drive:
1.
Click the drive letter to configure.
2. Select the Enable, Read, or Write check boxes to assign those characteristics to the drive.
3. With the drive letter selected, click in the Path column.
4.
Type the drive path.
NOTE: The preferred method of forwarding in Citrix connections with the HP Linux image is to
redirect from /media/usb0 (where 0 = 1st device, 1= 2nd device, 2 = 3rd device, 3 = 4th device)
for hard drive and USB drive key. As devices are added and removed, links are automatically created
in this location. For USB CD-ROM drives, redirect from /media/cd. This setting will be in place for
all Citrix connections from this unit.
You can change device ownership and attributes by editing /etc/fstab. See “man fstab” and “man
mount” for details. You can type man fstab or man mount at a xterm session command line to
display the options and settings available for editing and configuring “fstab”.
COM ports
Use this tab to map devices to communication ports.
58 Chapter 3 HP Connection Administrator ENWW