Administrator's Guide: Linux-based HP Compaq t5725 Thin Clients

To assign a connection to users:
1. In the HP Connection Administrator, click the Advanced button to access the Advanced
Configuration utility.
2. Under User Connections, select the appropriate user.
3. Under Available Connections, select the connection in the list of available connections, and then
click the Right arrow button to copy the connection to the list of connections for the user.
4. Click Save to save the updated list of connections for the user.
Configuring connections as primary, secondary, or to auto connect
Use the following procedure to configure connections in the Advanced Configuration utility.
●
You can designate connections as primary or secondary. A primary connection is the first attempted
in a group of connections. Secondary connections are attempted if the primary connection fails, and
attempt to connect in their listed order. You can assign several primary connections, each with several
associated secondary connections.
●
You can set primary connections to automatically connect when HP Connection Administrator starts
up.
●
You can set primary connections to automatically reconnect if the connection is lost.
54 Chapter 3 HP Connection Administrator ENWW