Administrator's Guide: Linux-based HP Compaq t5725 Thin Clients

Thin State
Thin State capture and deploy allows you to capture a thin client image and deploy it to other thin clients
of the same model.
Thin State Capture
The HP ThinState Capture tool is a simple wizard-based tool that can be used to capture an HP thin client
image that can then be deployed to another HP thin client of identical model and hardware.
What do you need to have?
●
An HP thin client Linux unit that contains the latest HP provided image.
●
An HP-approved USB drive key.
NOTE: The HP ThinState Capture tool is not a standalone tool and can only be accessed by the
administrator from within the thin client image.
NOTE: Save all data on the USB flash drive on some other device prior to performing this
procedure. The USB flash drive will be formatted and all data will be lost.
1.
Once you launch the ThinState Capture tool from within the Control Panel, you are presented with
the following screen.
34 Chapter 2 Control Panel Settings ENWW