Administrator's Guide: Linux-based HP Compaq t5725 Thin Clients

8. From the Use Filter list, select /usr/lib/lprng/filter/lpf. If NONE displays, “lprng” is not
installed
9. If you want to make this the default printer, select Make Default.
10. If desired, click Test to send a sample job to the printer.
11. Click Ok to save changes.
Network printer
1. Select the Printers tab.
2. If Load LPD Server at boot time is not available, “lprng” is not installed. You must install “lprng”
to enable printing.
3. Click Add.
22 Chapter 2 Control Panel Settings ENWW