Administrator's Guide: Linux-based HP Compaq t5725 Thin Clients

3. In the NTP Server box, type the IP address of the NTP server you want to use to set the time on the
thin client. For NTP to function properly, the date on the thin client must match the date on the server.
4. Click Apply.
Configuring the system hardware clock from BIOS
You can set the system hardware clock to your local date and time using the BIOS setup utility as follows:
1.
Reboot the system and press F10.
2.
After the Setup utility displays, press Esc.
3.
Select the standard CMOS features option, and then press Enter.
4.
Set the date and time using the Page Up and Page Down keys.
5.
To save the changes, press F10, and then press Enter.
ENWW Date/Time 13