HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The S-VOL specified with the device number differs from the S-VOL
specified with the storage system serial number, control unit number,
and command control address number.
Although the copy group definition file was created, the settings therein
might contain an error.
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
Inconsistencies exist among the val-
ues used to specify the secondary
volume: dd-name: rec#
YKJ208W TSO RC=8
A sub consistency group ID is specified for a copy group of the copy
type identified by copy-type. No sub consistency group ID can be
specified if the copy type is Business Copy, Continuous Access, or
Continuous Access Asynchronous.
copy-type
Copy type
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
Sub C/T group ID cannot be spe-
cified for a copy-type Copy
Group: dd-name: rec#
YKJ209E TSO RC=32
No volume exists in the range of the Number-Of-Pairs repetitions.
Number-Of-Pairs
Number of pair repetitions
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
The value specified for Number-of-
Pairs exceeds the range in which
volumes exist: Number-Of-Pairs:
dd-name: rec#
YKJ210E TSO RC=32
A copy pair, which has a P-VOL storage system serial number and an
S-VOL storage system serial number that do not match, was found in
a copy group of copy type Business Copy.
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
PVOL & SVOL of BC pair is in the
different storage system: dd-name:
rec#
YKJ211E TSO RC=32
Messages98