HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
A FREEMAIN error occurred. Contact maintenance
personnel.
nnn (decimal number)
FREEMAIN macro return code
xxx (decimal number)
Command code of the command that was being
executed when the error occurred
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
#
If this message is displayed at a time other than
logging, the KTZ212W message is not output to the
console. The message is recorded in LOG, and
processing continues.
A FREEMAIN error occurred. (return
code=nnn, cmd=xxx, pos=yyy)
KTZ212W CON
#
RC=0
The specified prefix prefix-name is being used by
another program.
Check whether any other program is accessing the
specified prefix. Terminate all programs that are
accessing the specified prefix, and then re-execute the
processing.
The specified PREFIX is being used by another
program: prefix-name.
KTZ214E MSG TSO SC=40
RC=40
A DEQ error occurred. Contact maintenance personnel.
nnn (decimal number)
DEQ macro return code
xxx (decimal number)
Command code of the command that was being
executed when the error occurred
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
DEQ error occurred. (return code=nnn,
cmd=xxx, pos=yyy)
KTZ215W MSG SC=0
RC=0
No information about the value specified for the STEM
parameter was found.
The KTLOAD command has not been executed.
Alternatively, the value specified for the STEM parameter
is different from the value specified for the STEM
parameter of the KTLOAD command.
For details about CLI commands, see the HP XP7 Smart
Manager for Mainframe User Guide.
stem
Value specified for the STEM parameter
STEM(stem) information for TPG Processing
is not found.
KTZ247E MSG SC=44
RC=44
Messages 49