HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNYNNN
A CAJ copy pair cannot be made because the
emulation types of the specified M-JNL group and
R-JNL group do not match.
EB8A
NNNNYNNN
A CAJ copy pair status cannot be changed be-
cause the status of the specified copy pair does
not allow the status transition.
EB94
NNNNYNNN
A CAJ copy pair status cannot be changed be-
cause the specified S-VOL is not installed.
EBA0
NNNNYNNN
A CAJ copy pair cannot be made because the
THPz volume specified for the S-VOL satisfies one
of the following conditions:
• The capacity is being expanded.
• The pages are being released.
• The pool of the corresponding THPz is being
initialized.
EBA7
NNNNYNNN
The command could not be executed because the
remote command has been issued to a volume that
is not installed.
EBA8
NNNYNNNN
The remote command cannot be executed because
the command device has not been defined.
EBB3
NNNYNNNN
The command could not be executed because the
command device is under LDEV guard.
EBBD
NNNNYNNN
A delta resync pair cannot be made because the
S-VOL of the specified copy pair is used by another
program product (BC/FlashCopy).
EBC6
NNNNYNNN
A CAJ copy pair cannot be resynchronized (with
the DELTAJNL parameter) because the specified
S-VOL has old differential information. Execute the
CAJ copy pair resynchronization (with the ALLJNL
parameter).
EBCE
YNYNNNNN
The remote command cannot be executed because
the path between the specified storage system or
CU (SSID) and the command target storage system
is not set, or because an error has occurred on the
path.
EBD0
YNNNNNNN
The path for the remote command transfer route
for the second site onwards, or for the command
device, might not be set, or a failure occurred in
the remote command transfer route. Make sure
that the path and the command device are set,
available, and have not failed, and then re-execute
the operation.
EBD3
Messages 289