HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYN
The collection copy is being performed on the P-
VOL.
C319
NNNNNYYNThe P-VOL is in a collection access status.
C31A
NNNNNYYN
The logical volume of the P-VOL is blocked (PDEV
blocking factor).
C31B
NNNNNYYN
The P-VOL cannot be accessed (because the LDEV
is blocked or in the NOT READY status).
C31C
NNNNNYYN
Formatting of the logical volume is being per-
formed on the P-VOL.
C31D
NNNNNYYNThe P-VOL is in the READ ONLY status.
C31E
NNNNNYYN
The logical path between the MCU and the RCU
is not set (number of path = 0).
C320
NNNNNYYN
The condition setting for the number of the Minim-
um Path between the MCU and the RCU is invalid.
C321
NNNNNYYN
The MCU is a storage system type that is not sup-
ported by CA or CAA.
C322
NNNNNYYN
The RCU sequence (number, SSID or CU) is incor-
rect.
C324
NNNNNYYNThe RCU is not NVS ON.
C325
NNNNNYYNThe subsystem level cache of the RCU is not valid.
C326
NNNNNYYN
A copy pair cannot be made because the status
of the P-VOL does not permit remote copy.
C327
NNNNNYYN
The track format of the P-VOL and S-VOL do not
match.
C328
NNNNNYYNThe S-VOL is protected by LDEV security.
C32A
NNNNNYYNThe P-VOL is protected by LDEV security.
C32B
NNNNNYYNThe S-VOL is protected by LDEV guard.
C32C
NNNNNYYN
A copy pair cannot be made because connection
with the specified S-VOL is not supported.
C32E
NNNNNYYN
The condition for the number of cylinders for CA
or CAA volumes is incorrect (the number of cylin-
ders in the P-VOL > the number of cylinders in the
S-VOL).
C32F
NNNNNYYN
The condition for the CA or CAA volume capacity
is incorrect (not P-VOL=S-VOL).
C330
NNNNNYYNThe device level cache of the S-VOL is not valid.
C332
Messages 269