HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYN
The command cannot be executed because the
serial number or SSID of the primary storage sys-
tem for the parameter does not match the actual
serial number or SSID of the primary storage sys-
tem.
C213
NNNNNYYN
The command cannot be executed because the
serial number or SSID of the secondary storage
system in the parameter is different from the one
already registered with the path (including ones
without a path).
C214
NNNNNYYN
A copy pair cannot be made because the specified
S-VOL is in use by another copy pair.
C215
NNNNNYYN
A copy pair cannot be resynchronized because
the specified copy pair is not in the suspend status.
C21A
NNNNNYYN
A copy pair cannot be dissolved because the status
of the specified volume is SIMPLEX.
C22A
NNNNNYYN
A copy pair cannot be suspended because the
specified copy pair is in the Pending status.
C23E
NNNNNYYN
Copy pair resynchronization, which causes a copy
direction reversal, cannot be made because the
specified copy pair is not in the SWAPPING status.
C28B
NNNNNYYN
Copy pair resynchronization, which causes a copy
direction reversal, cannot be made because a path
in the reverse copy direction is not set.
C28C
NNNNNYYN
A copy pair cannot be made because the charging
limit of the MCU program product has been ex-
ceeded.
C2A0
NNNNNYYN
A copy pair cannot be made because the charging
limit of CA in the MCU has been exceeded. Check
the license capacity of this and all related program
products.
C2A3
NNNNNYYN
A copy pair cannot be made because the charging
limit of CAA in the MCU has been exceeded.
Check the license capacity of this and all related
program products.
C2A4
NNNNNYYN
A copy pair cannot be made because the charging
limit of the RCU program product has been ex-
ceeded.
C2A8
NNNNNYYN
A copy pair cannot be created because the THPz
volume specified for the P-VOL is being expanded.
C2B3
Messages 267