HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNYNNNNN
The command to delete a path could not be ex-
ecuted because there is a CA, CAA, or CAJ copy
pair or journal volume in the target CU.
C126
NNYNNNNN
An attempt to establish or delete some of the
specified multiple paths have failed. Possible
reasons include one or more of the following:
• The specified parameter is invalid.
• The port or MP status is abnormal.
• A cable is not connected properly.
• The specified port is invalid.
C127
NNYNNNNN
An attempt to establish or delete all the specified
multiple paths has failed. Possible reasons include
one or more of the following:
• The specified parameter is invalid.
• The port or MP status is abnormal.
• A cable is not connected properly.
• The specified port is invalid.
C128
NNYNNNNN
The command could not be executed because the
number of SSIDs registered in the RCU exceeds
four.
C129
NNYNNNNN
The command could not be executed because the
device-identifying code of an RCU for which path
deletion is specified is invalid, or because the RCU
type (FIBRE/ESCON) is invalid.
C12A
NNYNNNNN
The command could not be executed because there
are one or more paths that have a different serial
number.
C12B
NNYNNNNN
The command could not be executed because
automatic port switching cannot be performed for
the specified path.
C12C
NNYNNNNN
The command could not be executed because the
device-identifying code of an RCU for which path
registration is specified is invalid, or because the
RCU type (FIBRE/ESCON) is invalid.
C12D
NNYNNNNN
The command could not be executed because all
CU numbers of an RCU for which path creation or
deletion is specified are not the same.
C12E
NNYNNNNN
The command cannot be executed. The reason
might be one of the following:
• The specified CU number is not defined.
• An LDEV is not defined for the specified CU
number.
C12F
Messages 265