HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYN
The S-VOL number in the CA or CAA parameter
does not match the bootup volume number.
C078
NNNNNYYN
The serial number or SSID of the secondary storage
system in the CA or CAA parameter does not
match the storage system serial number or SSID of
the RCU.
C079
NNNNNYYN
The serial number or SSID of the secondary storage
system in the CA or CAA parameter does not
match the storage system serial number or SSID of
the RCU.
C07A
NNNNNYYN
The S-VOL number in the CA or CAA parameter
is incorrect.
C0A1
NNNNNYYN
The S-VOL number in the CA or CAA parameter
is incorrect.
C0A2
NNNNNYYN
The command could not be executed because the
specified volume is in the SIMPLEX status.
C0B6
NNNNNYYN
A copy pair cannot be suspended because it is
already in the suspend status.
C0C5
NNNNNYYN
The command could not be executed because it is
already in the SIMPLEX status.
C0C6
NNNNNYYN
The command could not be executed because it is
already in the SIMPLEX status.
C0C7
NNNNNYYN
The command to suspend could not be executed
because the S-VOL for CA is in the Pending status.
C0F1
Table 61 Details of error codes C1xx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNYNNNNN
An attempt to establish a path has failed. Possible
reasons include either of the following:
• For an inter-CU logical path, the number of
RCUs registered in the MCU exceeds 4.
• For an inter-DKC logical path, the number of
path group IDs registered in one storage
system exceeds 64.
C120
NNYNNNNN
The command could not be executed because the
specified RCU parameter is invalid.
C122
NNYNNNNN
The specified RCU is not registered (the path is not
established).
C123
Storage system sense byte information264