HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
YNNNNNNN
The command could not be executed because the
path for the Remote DKC Control Function is not
set.
8CE9
NNNYNNNN
The command could not be executed because the
path for the Remote DKC Control Function is not
set.
8CEB
NNNYNNNN
The command could not be executed because in
the instruction to transfer to a remote storage sys-
tem, there is an error in the storage system serial
number.
8CFB
NNNYNNNN
The command could not be executed because the
command device is not defined.
8CFC
Table 58 Details of error codes 8Dxx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNYNNNNN
A path cannot be established because there is an
invalid parameter.
• The storage system serial number is incorrect.
• The SSID is incorrect.
• The CU number is not supported.
8D00
NNYNNNNN
A path cannot be established because there is an
invalid parameter. Alternatively, path establishment
is not supported.
8D01
NNYNNNNN
A path cannot be deleted because there is an in-
valid parameter. Alternatively, path deletion is not
supported.
8D09
NNNNNYYY
A copy pair cannot be made. The reason might
be one of the following:
• An inter-CU logical path has not been set
between the specified CUs.
• The storage system serial number of the P-VOL
is incorrect.
• The SSID of the P-VOL is incorrect.
• The CU number is not supported.
8D10
NNNYNNNN
The command could not be executed because the
volume specified by the host command parameter
is in the NOT READY status.
8D11
NNNYNNNN
The command could not be executed because the
logical volume of the specified volume by the host
command parameter is blocked.
8D12
Messages 251