HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
The log dataset is full.
ddd
Name of the log dataset that became full
If the log dataset name cannot be acquired, * is
displayed.
xxx (decimal number)
Command code of the command that was being
executed when the log dataset became full
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
The log dataset is full. (DSN=ddd,
cp=xxx:yyy)
KTG291I CON SC=0 RC=0
The log dataset was switched.
YKLOGmm
Log dataset before switching (YKLOG01 or YK-
LOG02)
YKLOGnn
Log dataset after switching (YKLOG01 or YK-
LOG02)
jjj
Job name
xxx (decimal number)
Command code of the command that was being
executed when the log dataset was switched
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
The log dataset was switched. (from=YK-
LOGmm, to=YKLOGnn, job=jjj,
cp=xxx:yyy)
KTG292I CON SC=0 RC=0
The device having the device number specified for the
DEVN parameter was not found. Alternatively, a device
other than DASD or an ALIAS volume for PAV was spe-
cified.
Specified DEVN is not found.KTH004E MSG SC=48
As a result of a scan, information acquisition was
skipped for the devices on which no I/O paths were
available.
count
Number of devices for which information acquisition
was skipped
The specified devices that had no available
I/O paths were skipped.
KTH033I MSG SC=4 RC=4
(Count)
Messages 25