HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NYNNNNNN
The setting or status acquisition command for
SMART could not be executed because of either
of the following reasons:
• The specified SSID and the SSID of the target
storage system do not match.
• The specified serial number and the serial
number of the target storage system do not
match.
• The specified CU number and the CU number
of the target device do not match.
• The specified volume number and the volume
number of the target device do not match.
• The target device does not exist.
The setting or status acquisition command could
not be executed because an invalid SSID was
specified for the command for SMART.
6EC4
NYNNNNNN
Configuration of the SMART volume failed because
an internal processing error occurred in the storage
system.
6EC8
NYNNNNNN
Configuration of the SMART pool failed because
an internal processing error occurred in the storage
system.
6ECA
NYNNNNNN
The tiering setting information and relocation status
of the SMART volume could not be acquired be-
cause an internal processing error occurred in the
storage system.
6ECC
NYNNNNNN
The performance information of the SMART volume
could not be acquired because an internal pro-
cessing error occurred in the storage system.
6ECE
Table 57 Details of error codes 7Fxx - 8Cxx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
YNNNNNNN
The command cannot be executed because no
program product for copying is installed.
7F86
YNNNNNNNThis command is not supported.
7FD4
Messages 249