HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYY
A copy pair cannot be created or resynchronized.
The reason might be one of the following:
• The storage system serial number of the P-VOL
is incorrect.
• The SSID of the P-VOL is incorrect.
• The CU number is not supported.
• The storage system does not support the
Open/MF Consistency Preservation Function.
69F3
NNNNNYYN
A status cannot be changed because the specified
volume is the S-VOL.
69F5
NNNNNYYY
A suspension cannot be made. The reason might
be one of the following:
• The specified parameter is invalid.
• The storage system does not support the
Open/MF Consistency Preservation Function.
69F7
NNNNNNNY
A suspension cannot be made because there is an
invalid parameter.
69F8
NNNNNYYY
A copy pair cannot be dissolved because there is
an invalid parameter.
69F9
NNNNNYYY
A copy pair cannot be dissolved because the
volume that received the command is a BC S-VOL.
69FB
NNNNNYNN
A CAA copy pair cannot be resynchronized, sus-
pended, or dissolved because a volume other than
CAA has been specified.
69FC
NNNNNYNN
A CAA copy pair cannot be dissolved with Con-
sistent specified because the specified volume is
not the S-VOL.
69FE
NNNNNYYY
A copy pair cannot be made because the program
product necessary for the operation is not installed.
69FF
NNNNNYNN
A C/T group ID cannot be registered because
there is an invalid parameter.
6A00
NNNNNYNN
The command could not be executed because the
corresponding volume is not the P-VOL of a CAA
copy pair or it is a Non Gen'ed volume.
6A07
NNNNNYNN
An ATTIME suspend time for CAA cannot be set
because there is a copy pair that is not in the DU-
PLEX status.
6A08
NNNNNYNN
An ATTIME suspend time for CAA cannot be set
because the specified C/T group timer type is not
System.
6A09
Messages 247