HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
A copy pair with a C/T group ID could not be
created because the P-VOL of the specified BC
copy pair meets both of the following conditions:
• The P-VOL is the S-VOL of a CAJ copy pair.
• The P-VOL is being used by another program
product as the P-VOL of a BC copy pair with
a C/T group ID.
20E4
NNNNNNNY
A BC copy pair cannot be made because the
specified P-VOL is an S-VOL for FlashCopy.
22F6
NNNNNNNY
A BC copy pair cannot be made because the
specified S-VOL is either a P-VOL or S-VOL for
FlashCopy.
22F7
NNNNNNNY
A BC copy pair cannot be resynchronized (by
either ReverseResync or QuickRestore) because the
volume is of a common volume configuration con-
sisting of a P-VOL of BC and a P-VOL of Flash-
Copy.
22F9
Table 49 Details of error codes 23xx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
The command could not be executed because a
BC program product has not been installed.
2301
NNNNNNNY
The command could not be executed because an
attempt was made to make a copy pair that ex-
ceeded the maximum number of BC copy pairs.
2309
Storage system sense byte information224