HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
A copy pair could not be created because the P-
VOL of the specified BC copy pair is an emulation
type (3390-V) that is not supported.
20BD
NNNNNNNY
A copy pair could not be created because the S-
VOL of the specified BC copy pair is an emulation
type (3390-V) that is not supported.
20BE
NNNNNNNY
A BC copy-pair operation cannot be performed
because power-off processing is in progress.
20C5
NNNNNNNY
If the emulation type of the P-VOL of the specified
BC copy pair is 3390-A, a copy pair could not be
created for one of the following reasons:
• No mainframe Fibre Channel adapter is in-
stalled.
• All of the Mainframe Fibre Channel adapters
are blocked.
20C9
NNNNNNNY
If the emulation type of the S-VOL of the specified
BC copy pair is 3390-A, a copy pair could not be
created for one of the following reasons:
• No mainframe Fibre Channel adapter is in-
stalled.
• All of the Mainframe Fibre Channel adapters
are blocked.
20CA
NNNNNNNY
A copy pair could not be created because the pool
of the THPz volume specified for the P-VOL of the
BC copy pair is being initialized.
20D0
NNNNNNNY
A copy pair could not be created because the pool
of the THPz volume specified for the S-VOL of the
BC copy pair is being initialized.
20D1
NNNNNNNY
A copy pair could not be created for one of the
following reasons:
• The P-VOL of the specified BC copy pair is
being used for FlashCopy SE.
• The P-VOL of the specified BC copy pair is a
TSE-VOL.
20D6
NNNNNNNY
A copy pair could not be created for one of the
following reasons:
• The S-VOL of the specified BC copy pair is
being used for FlashCopy SE.
• The S-VOL of the specified BC copy pair is a
TSE-VOL.
20D7
Messages 223