HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The function indicated by parameter-name cannot be used.
Use a device
#2
that supports the parameter-name function or
configuration. Also, if scanning was not performed after the storage
system microcode was replaced, perform another scan.
SUPFnc (hexadecimal number)
Value for the version of the storage system support function used
in the copy group
parameter-name
Function or configuration that cannot be used:
- UR_CTTIMEMODE: Consistency time mode for Continuous Ac-
cess Journal
- TC_OPENMF: Open/MF Consistency Preservation Function for
Continuous Access
- LinkageOption=HS: 2DC configuration with HyperSwap
and Continuous Access Journal
- AttimeSplitMode=QUICK: Quick suspend mode for the CAJ
ATTIME Suspend Function
- UR_PathID: Path group ID specification for Continuous Access
Journal
- GroupID=consistency-group-ID-of-Continuous
Access-copy-group-(hexadecimal-number): Consistency
group ID of the Continuous Access copy group that exceeds X'7F'
#1
If this message is output while the YKLOAD command is being ex-
ecuted, the RC is 44.
#2
The following are the storage system models for which you can
use parameter-name:
• Consistency time mode for Continuous Access Journal: XP12000s
with a storage system support function version of X'16' or later,
and XP24000s with a storage system support function version of
X'21' or later
• Open/MF Consistency Preservation Function for Continuous Ac-
cess: XP24000s with a storage system support function version
of X'22' or later, or VP9500s and XP7s with a storage system
support function version of X'31' or later
• 2DC configurations with HyperSwap and Continuous Access
Journal: XP24000s with a storage system support function version
of X'22' or later, and VP9500s and XP7s with a storage system
support function version of X'31' or later
• Quick suspend mode for the CAJ ATTIME Suspend Function:
XP24000s with a storage system support function version of X'23'
or later
• Path group ID specification for Continuous Access Journal:
VP9500s and XP7s with a storage system support function version
of X'33' or later
• Consistency group ID of the Continuous Access group that exceeds
X'7F': XP7s with a storage system support function version of
X'40' or later
Copygroup SUPFnc does not sup-
port parameter-name.
YKZ414E MSG
SC=36 RC=48
#1
Messages 211