HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
An error occurred while the suspend processing using the CAJ ATTIME
Suspend Function was being performed.
Check the error information, and remove the cause of the error. If
necessary, also check information such as the storage system log. After
that, use the YKSUSPND command to cancel the ATTIME suspend time,
and then acquire a backup again.
ii (hexadecimal number)
consistency group ID for Business Copy (00-7F)
jj (hexadecimal number)
Journal group number specified for the sub consistency group ID
for the Continuous Access Journal that links with BC (00-FF)
gg (hexadecimal number)
Generation ID (00-FF)
aa (decimal number)
Status of ATTIME suspension (0-4)
0: No ATTIME suspend time has been set.
1: The ATTIME suspend time has been set, but suspension has not
been performed yet.
2: Suspension was performed because the ATTIME suspend time
expired.
3: Suspension was performed because the timeout period expired,
or because the Continuous Access Journal copy pair was in the
suspend status at the ATTIME suspend time.
4: Suspension was performed because the system detected a no-
update journal.
ss (decimal number)
Status of Business Copy (0-3)
0: The suspend processing has not started.
1: The suspend processing is in progress.
2: The suspend processing ended successfully.
3: The suspend processing ended abnormally.
uu (decimal number)
Status of Continuous Access Journal (0-1)
0: All Continuous Access Journal copy pairs were in the DUPLEX
status during the suspension.
1: During the suspension, there was a Continuous Access Journal
copy pair whose status was not DUPLEX.
An error occurred during suspension
of CAJ ATTIME. (CT ID=ii, R-
JNL=jj, GENID=gg, ATTSTS=aa,
BCSTS=ss, CAJSTS=uu,
CODE=eeee, TIME=ATTIME-sus-
pend-time)
YKZ407E MSG
SC=24 RC=24
Messages204