HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
This log data indicates that a CLI command has been issued.
hh:mm:ss
Time the CLI command was issued (local time)
command
Issued CLI command name and its parameters
A maximum of 109 characters can be output. If 109 is exceeded,
the remainder are discarded.
hh:mm:ss command
YKZ310I SYS
This log data indicates the result of a CLI command execution
hh:mm:ss
Time the CLI command was issued (local time)
command
Issued CLI command name
rc
Return code for the CLI command
For details, see the command descriptions in the HP XP7 for Busi-
ness Continuity Manager Software Reference Guide.
hh:mm:ss command RC=rc
YKZ311I SYS
An error was detected during parameter analysis.Supplied parameters invalid.YKZ320E TSO
The specified time value is invalid.Time value is invalid.YKZ321E TSO
The SEC and MIN parameters cannot be specified at the same time.
Specify SEC and MIN parm exclus-
ively.
YKZ322E TSO
An error was detected in the REXX service.
command
Issued CLI command name
service
Name of the REXX service or TSO/E service where an error was
detected
r (decimal number)
Return code from the REXX service or TSO/E service
For details, see the TSO/E REXX User's Guide or the TSO/E Pro-
gramming Services.
n (decimal number)
Reason code from the REXX service or TSO/E service
For details, see the TSO/E REXX User's Guide or the TSO/E Pro-
gramming Services.
a (decimal number)
ABEND code from the REXX service or TSO/E service
For details, see the TSO/E REXX User's Guide or the TSO/E Pro-
gramming Services.
command detected the service
service error. (return code=r[, reason
code=n][, abend code=a])
YKZ330E TSO CON
RC=64
The CLI command terminated with an invalid return code.
command
Issued CLI command name
r
Return code that the CLI command created
command terminated with an invalid
return code. (r)
YKZ331E TSO RC=64
Messages 199