HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
ATTIME or CANCEL is specified together with SVOL.
Correct the YKSUSPND command parameter values, and then re-execute
the command.
Supplied parameters invalid
YKZ243E MSG
SC=48 RC=48
The specified storage system does not exist in the route list.
serial-number
Storage system serial number
Serial number of storage system is
not found in Routelist.
YKZ244E MSG
SC=36 RC=36
The combination of the specified command or the operand, and copy
group attribute is invalid.
Check the configuration file to make sure that the configuration allows
command execution, and execute the command again.
CopyGroup attribute combination is
invalid.
YKZ245E MSG
SC=48 RC=48
This operation is not supported when a remote function is in use.
operation
Operation name
This operation (operation) does
not support remote command.
YKZ246E MSG
SC=48 RC=48
Information on the specified stem name is missing.
The YKLOAD command has not been executed or the stem name does
not match the stem name specified for the YKLOAD command.
stem
Stem name
STEM(stem) information for Core
Processing is not found.
YKZ247E MSG
SC=44 RC=44
Certain information required for CLI command execution has not been
registered.
Execute the YKLOAD command to register the information.
stem
#
Stem name
# The (STEM = stem) portion is displayed only when the stem is
obtained.
Necessary information for Core Pro-
cessing is not stored. (STEM = stem)
YKZ248E MSG
SC=44 RC=0
Messages 177