HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The command cannot be executed because a NAME/TOKEN write error
occurred.
nnn (decimal number)
Return code set by the NAME/TOKEN registration routine (IEANTCR)
name (string)
Name registered in the Name/Token service
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
# If this message is output when the log and trace are obtained, the
RC is 0.
A NAME/TOKEN write error oc-
curred. (return code=nnn, name=
name, cmd=xxx, pos=yyy)
YKZ211E MSG CON
SC=40 RC=44
#
A FREEMAIN error occurred.
nnn (decimal number)
Return code of the FREEMAIN macro
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
# If this message is output at a time other than when the log and trace
are obtained, the YKZ212W message is not output to the console, but
is recorded in LOG and TRACE. Processing will then continue.
A FREEMAIN error occurred. (return
code=nnn, cmd=xxx, pos=yyy)
YKZ212W CON
#
RC=0
A GTRACE macro error occurred.
If this message appears frequently, stop acquiring GTF traces for the
USR trace (TRACE=USR). If the cause of the error is insufficient capacity
in the trace buffer or trace data set, increase the capacity, and then
restart GTF.
nnn (decimal number)
Return code of the GTRACE macro
mmm (decimal number)
Event ID
lll (decimal number)
Length of trace data
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
A GTRACE error occurred. (return
code=nnn, id=mmm, length=lll,
cmd=xxx, pos=yyy)
YKZ215W MSG
CON SC=0 RC=0
Messages170