HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
One or more devices in the 7700E storage system does not support
Continuous Access Asynchronous copy groups.
Check that the command can be executed on this copy group, and
then re-execute the command.
Some pairs in this group do not sup-
port CAA services.
YKV058E MSG
SC=36 RC=48
The YKRECVER command terminated with the return code nnnn and
the reason code rrrr.
This message is always displayed to indicate the return code and the
reason code.
nnnn
Maximum among the severity codes returned during command
execution
YKRECVER command return
code=nnnn, reason code=rrrr
YKV099I TSO
Table 27 List of messages (message ID YKW0x)
Explanation and recommended actionsMessage textMessage ID
The specified copy group copy-group did not reach the requested
status state within the specified time limit.
Timeout limit has expired without
group copy-group reaching
state state.
YKW001W TSO
Because the specified copy group contains a copy pair with a P-VOL
that is offline, the IEA494I message is not issued.
Make all P-VOLs within the specified copy group online, and then
re-execute the command.
Primary Device(s) OFFLINE. Unable
to receive IEA494I messages.
YKW002E TSO
One or more copy pairs identified by index within the specified copy
group copy group entered a status identified by state that does
not lead to the requested GOTO status. It is probable that this status
transition was triggered manually.
Conduct an investigation using the ISPF panel interface's monitor
function.
Unexpected transition of group
copy-group pair index device
xxxx to state state.
YKW003E TSO
The YKWATCH command uses the YKLOAD command to obtain the copy
group configuration. An error occurred during execution of the YKLOAD
command.
Conduct an investigation using the ISPF panel interface's load function.
nnnn
Return code of YKLOAD command
For details, see the description for the YKLOAD command in the
HP XP7 for Business Continuity Manager Software Reference
Guide.
YKLOAD error return code = nnnn
YKW006E TSO
The YKWATCH command uses the YKQUERY command to establish the
copy group status start baseline. An error occurred during execution
of the YKQUERY command.
Conduct an investigation using the ISPF panel interface's load function.
nnnn
Return code of the YKQUERY command
For details, see the description for the YKQUERY command in the
HP XP7 for Business Continuity Manager Software Reference
Guide.
YKQUERY error return code = nnnn.
YKW007E TSO
Messages 143