HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
The starting value (minimum value) specified by para-
meter-name-1 exceeds the exit value (maximum value)
specified by parameter-name-2.
Starting parameter-name-1 parameter
value exceeds ending parameter-name-2.
KTC007E TSO SC=48
RC=48
The value specified by parameter-name is not in
hexadecimal format.
parameter-name parameter value is not
valid hex.
KTC008E TSO SC=48
RC=48
The specified combination of parameters is invalid.
For specifiable combinations of parameters, see the
manual HP XP7 Smart Manager for Mainframe User
Guide.
Parameter combination is invalid.
KTC009E TSO SC=48
RC=48
This log message indicates that a CLI command was
issued.
hh:mm:ss
The time when the CLI command was issued (local
time)
command
The name of the issued CLI command and its para-
meters
A maximum of 109 characters can be output. If
109 is exceeded, the remainder are discarded.
hh:mm:ss command
KTC310I SYS
This log message gives the execution results of a CLI
command.
hh:mm:ss
The time when the CLI command was issued (local
time)
command
The name of the CLI command
rc
Return codes of the CLI command
For details about return codes for CLI commands,
see the manual HP XP7 Smart Manager for Main-
frame User Guide.
hh:mm:ss command RC=rc
KTC311I SYS
This log message indicates that a CLI command was
issued.
command
The name of the issued CLI command and its para-
meters
A maximum of 118 characters can be output. If
118 is exceeded, the remainder are discarded.
command
KTC910I CON
Messages14