HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
A storage system cannot be inserted into, or edited in a route because
the storage system has already been scanned via the specified device
address domain ID.
Correct the specified device address domain ID and serial number of
the storage system.
Processing to insert or edit a storage
system was denied because the stor-
age system has already been dis-
covered by the selected DADID.
YKM047E ISPF
Devices cannot be scanned because the remote device address domain
ID or Non Gen'ed device address domain ID has been specified as
the local device address domain ID in the Set Defaults panel.
You cannot perform a device scan
because a remote DADID or Non
Gen'ed DADID was specified as the
local DADID in the Set Defaults pan-
el.
YKM048E ISPF
To define a Continuous Access Journal copy group, a path group ID
is required.
A Path ID is required for Continuous
Access Journal Copy Group defini-
tions.
YKM049E ISPF
The specified copy group attribute value is invalid for this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
Invalid Copy Group attribute name
YKM050E MSG
SC=36 RC=48 (at-
tribute-value)
The YKMAKE command with the NOCOPY parameter specified was
executed on a Business Copy copy group. This parameter is invalid
on Business Copy copy groups.
Re-execute the YKMAKE command without specifying the NOCOPY
parameter.
NOCOPY option invalid for Business
Copy Copy Group
YKM056E MSG
SC=36 RC=48
One or more devices in the 7700E storage system does not support
Continuous Access Asynchronous copy groups.
Check that the command can be executed on this copy group, and
then re-execute the command.
Some pairs in this group do not sup-
port CAA services
YKM058E MSG
SC=36 RC=48
The YKMAKE command terminated with the return code nnnn and the
reason code rrrr.
This message is always displayed to indicate the return code and the
reason code.
nnnn
Maximum among the severity codes returned during command
execution
YKMAKE command return
code=nnnn, reason code=rrrr
YKM099I TSO
Table 13 List of messages (message ID YKM1x - YKM5x)
Explanation and recommended actionsMessage textMessage ID
The parameter combination is invalid.The parameter combination is invalid
YKM103E MSG
SC=48
Messages 117