HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The file was not found.File not found.YKM030E ISPF
The Refresh SMS key is not available while a new copy group is being
created.
Refresh SMS key is not available in
case of Copy Group Creation.
YKM031E ISPF
The operation is invalid.Invalid operation.YKM032E ISPF
This cannot be edited.Can not edit.YKM033E ISPF
Press the F10 key, and then select a consistency group ID.Press F10 key and select C/T ID.YKM034E ISPF
No value is specified in inputfld, or the specified value is invalid.
inputfld
The attribute name or the input field name
inputfld is not specified or inval-
id.
YKM035E ISPF
The APID you specified is already defined in another device address
domain ID.
Specified APID is defined to another
DADID.
YKM036E ISPF
Changing a local device address domain ID is not allowed.
Changing a local Device Address
Domain ID is not allowed.
YKM037E ISPF
The device number you specified was not found.Specified DEVN is not found.YKM038E ISPF
The device you specified is not a command device because the APID
cannot be used.
Specified device is not command
device because APID is not avail-
able.
YKM039E ISPF
For the Continuous Access Journal copy group definition, you need to
specify a consistency group ID and a sub consistency group ID.
A Consistency Group ID (C/T ID,sub
C/T ID) is required for Continuous
Access Journal Copy Group defini-
tion.
YKM040E ISPF
For the Business Copy/Continuous Access/Continuous Access Asyn-
chronous copy group definition, you cannot specify a sub consistency
group ID.
A sub Consistency Group ID cannot
be specified for BC/CA/CAA Copy
Group definition.
YKM041E ISPF
This consistency group ID is already defined. Please choose a different
ID.
This Consistency Group ID (C/T
ID,sub C/T ID) is already defined.
Choose a different ID.
YKM042E ISPF
For the Continuous Access Journal copy group definition, you need to
specify a mirror ID.
A Mirror ID is required for Continu-
ous Access Journal Copy Group
definition.
YKM043E ISPF
This path set ID is already defined.This Path Set ID is already defined.YKM044E ISPF
The physical path is already defined as a logical path.
priport
The primary port you specified
secport
The secondary port you specified
Physical path (priport secport)
is already defined in this logical
path.
YKM045E ISPF
The end control unit/command control address value is lower than the
start control unit/command control address value.
The end CU/CCA value must not be
lower than the start CU/CCA.
YKM046E ISPF
Messages116