HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The YKLOAD program failed to resolve the unit number (device address)
of the S-VOL in the specified CopyPair. For configuration definition,
this process uses the Host Discovered Array object in the secondary
device address domain. For other purposes, the current host device
address domain is used. The situation represented by this message is
not always fatal. Many CLI commands can be successfully executed
by using only the P-VOL unit address.
pair-index
See the pair index description in the explanation of the YKE003E
message.
Unable to resolve secondary device
address.
YKL082W MSG
SC=8 RC=8 (pair-
index)
The YKLOAD program failed to resolve the volume serial number of the
P-VOL in the specified CopyPair. For configuration definition, this
process uses the Host Discovered Array object in the primary device
address domain. For other purposes, the current host device address
domain is used. The situation represented by this message is not always
fatal. At present, the volume serial number is used only for display and
warning.
pair-index
See the pair index description in the explanation of the YKE003E
message.
Unable to resolve volume serial
number.
YKL083W MSG
SC=12 RC=12
(pair-index)
The configuration file could not be read, because the record length is
too long.
file
Name of the configuration file where the error was detected
rec#
Number of the line in the file file where the error was detected
Unable to read configuration file.
YKL085E MSG
SC=40 RC=40
(file:rec#)
An attempt to read the license information dataset has failed.
Check that the dataset name of the license key dataset is correct, and
that the license key dataset was created correctly. If necessary, transfer
the license key file again and recreate the license key dataset.
The license information dataset could
not be read.
YKL087E MSG
SC=40 RC=40 (file)
An attempt to open the configuration file identified by file failed.
dsstate
Status of the configuration file
file
Name of the configuration file in which the error was detected
File Open error: dsstate.
YKL088E MSG
SC=40 RC=40 (file)
An attempt to close the configuration file identified by file failed.
dsstate
Status of the configuration file
file
Name of the configuration file in which the error was detected
File Close error: dsstate.
YKL089E MSG
SC=40 RC=40 (file)
Messages 107