HP XP7 Command View Advanced Edition Installation and Configuration Guide (TK981-96001, May 2014)

3 Host Data Collector installation
This module describes how to install and set up Host Data Collector.
Prerequisites for installing Host Data Collector
Best practice is to use the default values during installation of Host Data Collector, such as installation
path and port number.
The following table lists values required for Host Data Collector installation.
RequirementsConditionValue
Windows:
%ProgramFiles%
Linux:
/opt
The default path to
the folder in which
Host Data Collector
will be installed.
Installation path
If you change the default installation folder, verify that the installation
location satisfies the following conditions:
Maximum 64 bytesAbsolute path length
Windows:
A to Z, a to z, 0 to 9, periods (.), underscores (_),
left parentheses ( ( ), right parentheses ( ) ),
single-byte spaces, backslashes (\), and colons
(:)
Linux:
A to Z, a to z, 0 to 9, underscores (_), and
forward slashes (/)
Allowed characters
Windows:
• Do not include consecutive spaces.
• Do not include a single byte space at the be-
ginning or end of a folder name.
• Do not specify the root of a drive as the install-
ation destination.
Other conditions
Specify the non-SSL communication port number
of the RMI registry (default: 22098/tcp).
Port number for RMI
registry
Port number
Specify the non-SSL communication port number
of the RMI server (default: 22099/tcp).
Port number for RMI
server
Specify the non-SSL communication port number
of the class loader (default: 22100/tcp).
Port number for class
loader
Installation and Configuration Guide 53