HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

chassis=4
arrayGroup=32
arrayGroupName=4-3-1
raidType=RAID5(3D+1P)
currentPortController=-1
defaultPortController=-1
isComposite=0
continuousAccessVolumeType=Simplex
businessCopyVolumeType=Simplex
snapshotVolumeType=Simplex
journalVolumeType=Simplex
sysVolFlag=0
externalVolume=0
differentialManagement=false
SnapshotPoolID=-1
journalPoolID=-1
thpType=-1
consumedCapacityInKB=-1
thpPoolID=-1
threshold=-1
tcaPoolID=-1
thpPoolVolControlFlag=-1
managementAreaPoolID=-1
List of 1 Ldev elements:
An instance of LDEV
.
. (Attributes of LDEV are omitted here)
.
*****: The value is encoded by the CLI.
AddLUSE
AddLUSE adds a LUSE volume to a storage system.
Make sure that you back up the data before creating a LUSE volume, because the data stored in the
LDEV/LU to be connected might be lost during creation of the LUSE volume.
When you create a LUSE volume, specify a formatted LDEV. If you include an unformatted LDEV during
creation of the LUSE volume, the hosts will not recognize the LUSE volume.
NOTE:
• This command cannot be used for HP XP7.
• When you add a LUSE volume with the luseoption parameter set, specify a LDEV in which a
path is set as the first LDEV. If a LDEV without a path set is specified as the first LDEV, an error
occurs.
• When a LUSE volume is added with the luseoption parameter set, the extended LUSE volume
might not be able to be recognized, based on the host. In this case, restart the host.
Command reference88