HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number groupnum=parity-group-number
|arraygroupname=parity-group-name}
[fsindex=index-number-of-region-of-unused-capacity] creationoption=dividebycap
capacity=capacity-of-the-logical-unit [emulation=OPEN-V]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
[format={none|normal|quick}] [capacitytype={KB|block}]
When creating multiple logical units in bulk by specifying their number:
hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number groupnum=parity-group-number
|arraygroupname=parity-group-name}
[fsindex=index-number-of-region-of-unused-capacity] creationoption=dividebynum
numoflus=number-of-logical-units-to-be-created [emulation=OPEN-V]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
[format={none|normal|quick}]
Format for XP1024/XP128
hdvmcli [URL] AddLogicalUnit [options]
serialnum=serial-number model=model
{chassis=chassis-number groupnum=parity-group-number
|arraygroupname=parity-group-name}
capacity=capacity-of-the-logical-unit [emulation=emulation-type]
[devnum=logical-unit-device-number] [lusubinfo=LDEV]
Parameters
Table 28 AddLogicalUnit command parameters
DescriptionStatusParameter name
Serial number of the storage system where the LU is addedRequired
serialnum
Model of the storage system where the LU is addedRequired
model
Number of the chassis for the parity group where the LU is added
If you specify this parameter, make sure that groupnum is also
specified.
Always specify either the chassis and groupnum parameters
together, or the arraygroupname parameter by itself. Do not
specify arraygroupname together with chassis and
groupnum. Doing so results in an error.
Optional
chassis
Number of the parity group where the LU is added
If you specify this parameter, make sure that groupnum is also
specified.
Always specify either the chassis and groupnum parameters
together, or the arraygroupname parameter by itself. Do not
specify arraygroupname together with chassis and
groupnum. Doing so results in an error.
Optional
groupnum
CLI Reference Guide 83