HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Name of the host storage domain
Specify any name. The value specified for this parameter
is used only by Device Manager to identify the host storage
domain.
You can use a character string of 1-64 bytes for a name.
Spaces at the beginning or end of a name are not
registered.
Optional
name
Nickname of the host storage domain
Specify the name used for the host group to be created in
the storage system.
If this parameter is omitted, it is set automatically.
When adding a host storage domain, if you use the
HostScan command to register a host in Device Manager,
in the nickname parameter specify the name of the host
that uses the host storage domain. For details about the
HostScan command, see “HostScan” on page 355.
You can use the following characters:
A-Z a-z 0-9 ! # $ % & ' ( ) + - . = @ [ ] ^ _ ` { } ~ and
spaces
A nickname cannot begin or end with spaces.
The character string used for a nickname must be within the
following range:
• HP XP7: 1-64 bytes
• P9500: 1-64 bytes
• XP24000/XP20000: 1-32 bytes
• XP12000/XP10000/SVS200:
Microcode version earlier than 50-04-01: 1-16 bytes
Microcode version 50-04-01 or later: 1-32 bytes
• XP1024/XP128: 1-8 bytes
Optional
nickname
The following table lists the values that can be specified in the hostmode parameter.
Table 25 Values that can be specified in the hostmode parameter
Value of hostmodeStorage system
• Standard
• VMware
• HP
• OpenVMS
• Tru64
• Solaris
• NetWare
• Windows
• AIX
• VMware Extension
• Windows Extension
• UVM
HP XP7
P9500
XP24000
XP20000
Command reference70