HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

NOTE:
When AddHostStorageDomain adds a host storage domain, LUN security for the target port is
automatically enabled. Make sure that the I/Os of the target port are stopped.
Parameters
Table 24 AddHostStorageDomain command parameters
DescriptionStatusParameter name
Serial number of the storage system for the host storage
domain
Required
serialnum
Model of the storage system for the host storage domainRequired
model
Port ID of the host storage domain
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the
same time, an error occurs.
Optional
port
The port name for the host storage domain
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the
same time, an error occurs.
Optional
portname
Domain ID of the host storage domain
This parameter can be specified in decimal and
hexadecimal. If you specify a hexadecimal number, add
the 0x prefix.
The execution results are output in decimal.
The specifiable values depend on the storage system.
• For HP XP7, P9500, XP24000/XP20000, and
XP12000/XP10000/SVS200: 1 to 254
• For XP1024/XP128: 1 to 127
• Otherwise: 1 to 511
Optional
domain
Host mode of the host storage domain
For the values that can be specified, see Table 25.
The default is Standard.
Optional
hostmode
List of host mode options
To specify two or more options, separate them with
semicolons (;).
For details about the values that you can specify, see Table
26.
Optional
(HP XP7
P9500
XP24000
XP20000
XP12000
XP10000
SVS200)
hostmodeoption
CLI Reference Guide 69