HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Option information (cache mode) of the logical unit
Either of the following values can be specified:
• true: Valid
• false: Invalid
If the cachemode parameter is omitted, the following values are
set:
• When the inflowcontrol parameter is specified, true is
set.
• When the inflowcontrol parameter is omitted
If the external volume is a command device, false is set.
If the external volume is not a command device, true is set.
Optional
cachemode
Option information (cache inflow control mode) of the logical unit
Either of the following values can be specified:
• true: Valid
• false: Invalid
If this parameter is omitted, false is set.
Optional
inflowcontrol
Option information that determines whether logical units are to
be created at the same time an external parity group is created
Either of the following values can be specified:
• none: No logical unit is created.
• create: Logical units are created.
If this parameter is omitted, none is set.
Optional
luoption
Number of logical units to be created
The only valid value is 1.
If this parameter is omitted, 1 is set.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
numoflus
Device number of the logical unit
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
If this parameter is omitted, a value is automatically set by Device
Manager.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
devnum
Volume size of the logical unit
If this parameter is omitted, a logical unit having the same size
as the external volume is created.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
You can use the capacitytype parameter to specify the unit
used for capacity (KB or blocks).
Optional
capacity
CLI Reference Guide 65