HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Port name of the port to which the external storage system is
connected
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set becomes the primary path.) Make
sure that the order and number of the values specified for these
parameters are correct.
Required
portname
Port WWN of the external storage system
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set becomes the primary path.) Make
sure that the order and number of the values specified for these
parameters are correct.
Required
externalwwn
LUN of the external volume
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set becomes the primary path.) Make
sure that the order and number of the values specified for these
parameters are correct.
Required
externallun
Path group ID
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
pathgroupid
Emulation type of the logical unit
OPEN-V is the only value that can be specified.
If this parameter is omitted, OPEN-V is set.
Optional
emulation
CLPR number
If this parameter is omitted, 0 is set.
Optional
clprnumber
Command reference64