HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Custom roleRoleCommand name
• Storage Administrator (Provisioning)
• Storage Administrator (Performance Management)
• Storage Administrator (Local Copy)
• Storage Administrator (Remote Copy)
• Storage Administrator (Initial Configuration)
• Storage Administrator (System Resource Manage-
ment)
• Security Administrator (View & Modify)
• Security Administrator (View Only)
• Audit Log Administrator (View & Modify)
• Audit Log Administrator (View Only)
• Support Personnel
• User Maintenance
• Admin
• Modify
• View
GetReplicationCon-
trollerPair
When replicating volumes in one storage system:
Storage Administrator (Local Copy)
When replicating volumes between storage systems:
Storage Administrator (Remote Copy)
• Admin
• Modify
ModifyReplication
Notes on executing CLI commands
The following table provides notes on executing the Device Manager CLI commands and on adding
LUNs or host storage domains. It also provides a note about the characters that can be used for host
names and storage system names.
Table 21 Notes on executing commands
DescriptionItem
When adding a LUN or host storage domain, make sure that I/O
operations from the host to the corresponding port have stopped.
If you add a LUN or host storage domain, the LUN security for the
corresponding port takes effect automatically. Because of this, when the
command is executed, if I/O operations are taking place from the host
to the port being added, then the I/O operations might terminate with
an error.
Related commands
• AddLun
• AddHostStorageDomain
• AddWWNForHostStorageDomain
Adding a LUN or host storage do-
main
CLI Reference Guide 57